1. We’re Back – Thanks for Your Patience! We’re thrilled to welcome you back! After some time offline, our site is up and running again, though you may experience occasional instability as we work through the final steps of restoring full functionality. For now, please avoid uploading unnecessary image files and be patient with us as we work to get everything back to normal. Your understanding and support mean the world to us – thank you for sticking with us through this!
    Dismiss Notice
  2. Email notifications are being sent but may be blocked by spam filters. If you don’t receive an expected email, please check your spam folder.

Subaru Outback whistle

Discussion in 'Towing & Tow Vehicles' started by CampMech, Jul 17, 2015.

  1. Vince G

    Vince G Novice

    Does anyone have a pic of the rails?

    Thanks
     
  2. Long Truong

    Long Truong Junior Ranger

    Here it is, you can see the black rubber I jammed in. I believe maybe they took it out on newer models. Our CI is 2011.
     

    Attached Files:

  3. Vince G

    Vince G Novice

    Thanks mine had it but it is older. Never heard a whistle towing with Ram
     
  4. Long Truong

    Long Truong Junior Ranger

    Almost positive it only appears if you tow with a low profile vehicle. Our SUV isn't very tall. Your Ram is probably way taller.
     
  5. Cary Winch

    Cary Winch Camp-Inn Staff

    It also depends greatly on your hearing. I never hear the awning rail whistle on a 560 but others in the car with me do. I have no high freq. hearing though. I have not heard crickets for decades.

    On a note, this rail was omitted in 2017 so newer 560s don't create this conversation.

    Cary
     
    Kevin likes this.
  6. David & Diane

    David & Diane Newbie

    We had this problem while driving our new-to-us 560 Ultra home from Kentucky where we purchased it. We have a Ford Edge. The whistle drove us crazy! My fix was to buy several feet of black rubber tubing at an auto parts store that was the same size as the tunnel in the rail and, using liquid dishwashing soap as a lubricant and a pair of needle nose pliers as a tool, pull the tubing from one end of the tunnel to the other, completely filling it with the rubber tubing. I then cut off the two ends of the rubber tubing flush with the ends of the rail. No more whistle!
    David Pedersen
     
    Kevin, campdude and SethB like this.
Loading...

Share This Page